XSYS and Nilpeter compare XSYS thermal and solvent plates

The sample job was printed, in turn, with the solvent nyloflex FTS plate and the thermal nyloflex XVH plate from XSYS. The thermal plate was processed with a nyloflex Xpress Thermal Processor, which offers considerable sustainability benefits compared to standard solvent processing systems in use, according to XSYS. 

 

‘Our main aim with this print trial is to confirm that there is no compromise in print quality when switching from XSYS solvent plates to thermal,’ said Friedrich von Rechteren, global commercial VP at XSYS. ‘In fact, what we found is that besides producing excellent print quality and improving flexo’s green credentials, the versatile nyloflex XVH thermal plate – like the solvent nyloflex FTS – also reduces complexity, inventory, and waste to provide a higher Overall Equipment Efficiency (OEE).’ 

 

The thermal nyloflex XVH Digital plate brings similar benefits to the table as the solvent nyloflex FTS Digital. Both are inherent flat top dot plates with a smooth surface that has a fine grain making them able to hold customized surface screening patterns, such as Woodpecker. They also both feature wettability and anti-ink fill-in (AIF) technology. 

 

The thermal nyloflex XVH does not require solvents for processing. The nyloflex Xpress Thermal Processor delivers print-ready nyloflex thermal plates in less than one hour, which translates to 88 percent lower energy consumption, XSYS said.  

 

‘It also eliminates the long drying times experienced with solvent systems, which often cause a bottleneck in production and delay press restart when damaged plates have to be replaced.’ 

 

The print trials were conducted at the Nilpeter Technology Center in Denmark, where the sample jobs were produced on FA-17 Line narrow web flexo press running at 200m/min. The same design was printed on three different substrates: a 38-micron white BOPP, a self-adhesive white PE, and a 45-micron PET shrink material with a solvent nyloflex FTS 114 Digital plate and a thermal nyloflex XVH 114 Digital plate using UV flexo inks from Flint Group Narrow Web.  

 

Jesper Jørgensen, global sales manager at Nilpeter, said: ‘When we compared the results from the two different plates, there was no difference in quality or registration – it was just spot on. With most new jobs, there are always some start-up difficulties getting the plates, the inks, and the material to mix and match together, but we found it surprisingly easy. It was a walk in the park.’ 

 

Von Rechteren added: ‘We continue to investigate ways in which printers can improve their process to make it more efficient and productive, and we do that by partnering with other leading manufacturers in our industry to offer the best solutions to our customers. Sustainability is one of the biggest drivers in today’s market, so naturally we have a very strong focus on finding ways to produce eye-catching print without negatively impacting the environment. 

 

‘We can now fully recommend the nyloflex XVH plate as an alternative solution to current market challenges, because it delivers print quality that equals solvent plates, offers reduced total cost of ownership, and is more environmentally friendly.’