for highly automatic in-line production of bundled die-cut labels.

Customer benefits

 Excellent performance of up to 1,440 bundles per 60 minutes with a minimum of manpower

 OptiChange** allows to perform a job change in only 15 minutes

 OnePunchRegister* allows to position the cutting die in line with the printed image with just one pack

 Utmost cutting and die-cutting precision via fixing the material

 Highly reliable in daily use and long lifespan

 

Highlights

 **Menu-driven setup makes operation easier and reduces make-ready time

 

Automatic cutting machine AC-25plus

 **Front-side knife change with alternate frames allows to prepare the knife outside the machine

 Utmost quality is provided by lateral aligning gauge, front gauge system and waste cut aligning gauge

 Cuts two strips at once

 

System die-cutter DCplus

 **Alternate-frame system with (patented) positioning aid for the preparation outside the machine

 **A centered alternate frame allows the precise alignment to the right and left-hand sides (patented)

 **Size adjustment of the gauge and feeder without any tools and synchronous via hand wheel (patented)

 *The stamping punch can be continuously extended millimeter by millimeter for setting the register

 Both bundles are separated in the feeding area and pushed into the die-cutter separately

 Option: Cardboard remover (patented) allows to work with underlay cartons even for log banding

 

Single-head bander BDplus

 **Motorized format adjustment via central control display

 **Precision adjustment also in automatic operation

 Allows two separating processes per die-cutting cycle, if the pack contains two divider cartons

 Ultrasonic-welding unit for single-pack and log banding

 Direct restart of production after interruption of control voltage, e. g. after reaching into the light barrier

 

Technical data Label size min.¹

20 × 40 mm | 0.79 × 1.57 in

Label size max. (2 strips)

120 × 120 mm | 4.72 × 7.72 in

Label size max. (1 strip)

170 × 210 mm | 6.69 × 8.27 in

Stack height min.

25 mm | 0.98 in

Stack height max.

120 mm | 4.72 in

Height of cutting die, min. — max.

50 mm | 1.97 in — 100 mm | 3.94 in

Performance max.², 1 strip

16 packs / minute

Performance max.², 2 strips

24 packs / minute

 

 

Polar-Mohr